48 products
  • The Acebikes TyreFix motorcycle tensioning belt (max 500 kg)

    Perfectly designed belt attachment system for all types of motorcycles. So the transport of your bike is safe. You can use this system conveniently on a trailer, a van or a van.
    The TyreFix reliably prevents the bike from falling over or slipping. The flexible and durable material is suitable for all tyre sizes and is easy to fit.
    To counteract unwanted movements of the motorcycle tyre, the TyreFix tensioning belt system is equipped with a special anti-slip material at the point where it rests on the tyre.
    The set is divided into various fastening elements, making fixing and dismantling the tensioning strap system convenient and uncomplicated.

    Special features:
    Quick and easy to mount (front or rear)
    Special anti-slip material on the inside
    Set is divided into different mounting elements
    Suitable for any size of motorcycle tyre
    High quality, durable materials
    Maximum 500 kg
    Colour grey
    Material polyester

    Scope of supply:
    Belt fastening system (without lashing straps!))
    Without mounting rails!
    $71.95
    $71.95
    Sold out
  • Electronic box version D
    The new D-box with extended functions is expected to be available from December 2021.

    This electronics box controls the most important functions on the motorcycle. The following options are possible:
    - Integrated flasher relay, via pushbuttons or switches
    - Output for indicator control available
    - 2 inputs for side stand - and neutral switch are implemented
    - Adjustable turn signal reset and limiting light function of the turn signals (position light)
    - Control of main beam and low beam via pushbutton or switch
    - Control of horn via pushbutton
    - Control of brake light
    - Control LED's at the outputs for easier monitoring of the functions
    - Cable reduction in the handlebars via an optionally available handlebar adapter in button mode possible.

    By the way, the new D-Box can also be controlled with only 2 buttons. Therefore, no button combinations need to be memorized by the user:
    - A short press on one of the two buttons switches the respective turn signal on. A
    further short press on one of the two buttons switches it off again.
    - A slightly longer press and hold (over about 0.3 seconds) left switches the horn.
    - A slightly longer press and hold (for about 0.3 seconds) right switches the starter.
    - Two short button presses on the left side switch between high and low beam.
    - Two short button presses on the right side turn the ignition on - or off.
    - A short press on both buttons at the same time switches on the hazard warning lights.

    The individual outputs are of course short-circuit proof and self-resetting after a short circuit.

    By the way, the D-Box can also be used for Harley Davidson motorcycles with a TSM/TSSM module to control the TSM/TSSM module. A combination with the existing alarm system is thus possible without further ado.

    Dimensions: 50 mm length x 12.5 mm width x 42 mm height
    Current consumption: maximum 7mA at 12V
    Housing: black impact-resistant ABS plastic, waterproof encapsulated
    Input voltage: 6 - 18 volts
    Connections: Control section 0.14mm², power section 0.75 mm², 1.5 mm² for supply cable, 20 cm each
    Maximum output current: 5 amps per output, current limit at 10 amps
    Maximum ambient temperature: 80 degrees Celsius
    Allowable current from 12V connection: 20 amps

    Scope of delivery: 1 piece

    NOTICE:
    You can find a small video on how to set up the box here: https://youtu.be/P8NdlLaev_Q
    If you have any questions about the right box, you can use the following interactive video: https://www.youtube.com/watch?v=nietDWvNRr

    NOTE:
    Replaces item 361-925 electronics box version G and 361-984 electronics box version T.
    $245.00
    $245.00
    Sold out
  • Adapter for use in conjunction with the D-Box or CBS wiring harness.

    So the buttons can be connected directly in the handlebar with the adapter and it is only 1 cable to the control box.

    For button operation only - not for switch function.

    Dimensions:
    25 mm x 10 mm x 8 mm
    Housing:
    PLA plastic, waterproof encapsulated
    Connections:
    0.14 mm x 200 mm
    $27.60
    $27.60
    Sold out

  • Understated and sophisticated, our Coastal Canvas Crossbody bag is versatile enough to accompany season-spanning ensembles, while organizing and securing all your essentials in lasting quality.

    PRODUCT FEATURES 100% Cotton Canvas 100% Genuine Leather Accents 100% Recycled Nickle-Free Hardware 100% Vegetable Base Dyes 100% Handcrafted Main Zipper Closure Adjustable Shoulder Strap Detachable Shoulder Strap Exterior: (1) Sleeve Pocket Interior: (1) Zipper Pocket, (1) Sleeve Pocket

    PRODUCT DIMENSIONS 7" Width x 10" Height x 3" Depth (Inches) Shoulder Strap Drop: 25" (Inches)

    $55.00
    $55.00
    Sold out

  • PRODUCT FEATURES 100% Cotton Canvas 100% Genuine Leather Accents 100% Recycled Nickle-Free Hardware 100% Vegetable Base Dyes 100% Handcrafted Main Zipper Closure Padded Laptop Compartment w/ Secure Strap Adjustable Shoulder Straps Water Bottle Side Pockets Exterior:(3)Zipper Pockets,(2)Water Bottle Pockets, (2) Magnetic Slip Pockets Interior:(1) Padded Laptop Compartment,(2)Slip Pockets

    PRODUCT DIMENSIONS 12"W x 16"H x 5" D(Inches) Handle Drop:3"(Inches) Shoulder Strap Drop:24"(Inches)

    $90.00
    $90.00
    Sold out
  • H4 with E-test incandescent lamp 12V 60/55W P43t, UV filtered
    $5.95
    $5.95
    Sold out

  • HeinzBikes BLOKK-Line MIRCO 3in1 LED turn signal, brake tail light, multifit - all brands-Left Side

    BLOKK-Line MIRCO 3in1 LED turn signal, brake tail light, multifit - all brands

    The SMALL WONDER WITH NEW SMD LIGHTING TECHNOLOGY
    3in1 TURN SIGNAL WITH BRAKE AND BACKLIGHT FUNCTION
    COMPATIBLE WITH ALL MOTORCYCLE BRANDS
    BRILLIANT LIGHTING POWER AND UNIQUE OPTICS

    The M8 thread makes them easy to mount anywhere.
    They are available as LED turn signals, turn signals with position light,
    3in1 turn signals with brake and tail light function and for those who want it extra small
    as BLOKK-Line MICRO with extremely bright SMD light unit.
    With their high-quality surface finish of black anodized or
    in chrome, they replace the large original turn signals and give
    every bike a classy custom look.

    Features
    - Compatible with all motorcycle makes and models
    - Replace the large turn signals and taillights on any bike
    - Give the rear a clean custom look
    - State-of-the-art and extremely bright SMD technology in minimal size
    - Integrate perfectly into any bike design
    - High-quality CNC-milled aluminum
    - Easy installation with M8 thread and nut
    - Noble finish of the surface in black anodized or chrome
    - Light units with E-mark and therefore TÜV-compliant
    $89.95
    $89.95
    Sold out

  • HeinzBikes BLOKK-Line MIRCO 3in1 LED turn signal, brake tail light, multifit - all brands-Right Side

    BLOKK-Line MIRCO 3in1 LED turn signal, brake tail light, multifit - all brands

    BLOKK-line MICRO 3in1 SMD turn signal



    The SMALL WONDER WITH NEW SMD LIGHTING TECHNOLOGY
    3in1 TURN SIGNAL WITH BRAKE AND BACKLIGHT FUNCTION
    COMPATIBLE WITH ALL MOTORCYCLE BRANDS
    BRILLIANT LIGHTING POWER AND UNIQUE OPTICS

    The M8 thread makes them easy to mount anywhere.
    They are available as LED turn signals, turn signals with position light,
    3in1 turn signals with brake and tail light function and for those who want it extra small
    as BLOKK-Line MICRO with extremely bright SMD light unit.
    With their high-quality surface finish of black anodized or
    in chrome, they replace the large original turn signals and give
    every bike a classy custom look.

    Features
    - Compatible with all motorcycle makes and models
    - Replace the large turn signals and taillights on any bike
    - Give the rear a clean custom look
    - State-of-the-art and extremely bright SMD technology in minimal size
    - Integrate perfectly into any bike design
    - High-quality CNC-milled aluminum
    - Easy installation with M8 thread and nut
    - Noble finish of the surface in black anodized or chrome
    - Light units with E-mark and therefore TÜV-compliant
    $89.95
    $89.95
    Sold out

  • HeinzBikes NANO LED indicators for H-D DYNA 1990-2017

    NANO Series LED indicators for H-D handlebar fittings DYNA 1990-2017
    The NANO dashboard indicators are the smallest and brightest dashboard indicators that HeinzBikes® has ever developed.with furious brightness and laser-like luminosity.
    Model-specific manufactured in over 50 different versions.
    100% fit exactly on all original Harley-Davidson® modelsHandlebar fittings.
    Modern lighting technology in minimal size makes them smaller than a cent piece.
    Precisely manufactured housings made of high-quality billet aluminium anodized in black orChrome.
    The indicators are shot at 12V without resistance and do not cause fast flashing in the dash.
    They are E-approved and TÜV-compliant.
    Protected design.
    $202.89
    $202.89
    Sold out
  • HIGHSIDER CNC-milled fairing mirror ACTION, black

    High quality CNC-milled fairing mirror in rectangular shape with a black anodized aluminium head. Thanks to the use of a second joint on the handle, there are additional adjustment possibilities for your safety. Including extra adapter M10 x 1,25 mm with left hand thread for Yamaha. Can be used for left and right side. Please order adapter set 304-020 or 304-022 separately!

    Cautious with style whether classic or modern. The HIGHSIDER mirror series are characterised by striking design and aerodynamic function. So you keep the overview..

    Dimensions:
    Width, head: 120 mm
    Height, head: 48 mm
    Length, arm to joint: 140 mm
    Length, arm to threaded bolt: 170 mm

    Scope of supply: 1 pair without adapter.

    Note: without E-Test mark
    Please adapter set Art.-5Order no. 304-020 or 304-022 separately.
    $65.95
    $65.95
    Sold out
  • HIGHSIDER CONERO 2 handlebar end mirror, short
    - BLACK EDITION - The all-black edition for all those who like to see black.

    CNC machined handlebar end mirror with a round anodized aluminum head in matte black. The mirror arm has three stylish air vents, and a hinge on the clamp gives you extra adjustment for a great view.
    With the second generation of the popular HIGHSIDER CONERO handlebar end mirror, you can choose the type of mounting yourself. Either with the supplied reduction sleeves directly to a 7/8, 1 inch or 22 mm 25.4 mm handlebar or to the optionally available handlebar end weights HIGHSIDER DOT, HIGHSIDER CURVE and HIGHSIDER CONERO TYPE 2. The mirror can be used on the left and right.

    Our HIGHSIDER CONERO series lives from a minimalist design and fits perfectly to undisguised motorcycles. The shapely and high-quality machined aluminium add-on parts give your bike face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was just allowed to be a motorcycle - reduced to ride, experience and experience.

    Consideration with style - whether classic or modern. The HIGHSIDER mirror series are characterized by striking design and aerodynamic function. That's how you keep track.

    Dimensions:
    A/B Diameter head: 98 mm
    C Total width: 150 mm
    D Total height: 100 mm
    Stem length center - center: 85 mm

    Scope of delivery: 1 piece, including.
    1 x adapter for 7/8 inch (22 mm)
    1 x adapter for 1 inch (25.4 mm)

    Your bike - your project: Design your naked bike with our HIGHSIDER CONERO products to an individual highlight - expressive, rich in contrast and perfect in form!
    $71.95
    $71.95
    Sold out
  • HIGHSIDER handlebar ends EVO, chrome plated or black.

    -Chrome plated or black handlebar ends, suitable for handlebars with an inner diameter of 12 to 22mm - i.e. for most 7/8 inch and 1 inch aluminum or steel handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be attached to the Bar End Weights.

    Tailor-made for your bike the extensive HIGHSIDER accessories are perfectly tailored to your motorcycle. With a maximum of quality and functionality you can easily design your bike according to your wishes.

    Please check the measurements for accuracy of fit before purchase!

    Measures: diameter: 25,4 mm
    length: 28 mm
    scope of supply: 1 pair, includes:
    Je 2 x Bar End Weights
    Je 2 x clamping sleeves D. 12 mm and D. 16 mm
    Je 2 x centring sleeves type 1, type 2, type 3
    Je 2 x central screw M6, lock washer and conical nut M6

    Replacement attachment set: 161-034
    $35.95
    $35.95
    Sold out
  • HIGHSIDER LED Sequence flasher STS 1, E-approved
    For front / rear suitable.

    Shapely flasher housing made of aluminium. Dark glass, clear edges alternating with slight curves give the Indicators a modern design. With the STS 1 LED turn signal, which fits perfectly to almost every machine, thanks to the modern running light system, you can now use a modern flashing light and add a new special design element.

    The LED technology with its many individual light sources makes it possible:
    If the individual LEDs light up one after the other when flashing, aoptical wiping effect, a kind of light band from the inside to the outside. Known by some well-known car manufacturers, this modern technology is now also available for the motorcycle available.

    Dimensions:
    - Width: 68 mm
    - Width with stem: 82 mm
    - Height: 20 mm
    - Depth: 23 mm
    - Threaded bolt: M8 x 20 mm

    Connections:
    Yellow cable = indicator (+)
    Black cable= Mass (-)

    Supply: 1pair

    Note:
    LED indicators work with less watts than standard indicators. Therefore it may be necessary to replace the original relay with a load independent relay must be replaced.
    $119.95
    $119.95
    Sold out
  • HIGHSIDER LED turn signal CLASSIC-X1, E-approved
    - Form and function wonderfully merged together. -

    A new attractive turn signal shape to design your vehicle individually. With their extraordinary design, the turn signals fit visually to many motorcycles such as Café Racer, Chopper or Naked Bikes. The CLASSIC-X1 blend in harmoniously with the overall look of your motorcycle. These shapely LED turn signals really have it in itself. High-quality aluminium housing in small classic form and especially bright thanks to SMD technology. Two powerful SMD's provide the unmistakable directional indication. Look forward to these classically shaped direction indicators with tinted reflector, in silver and in black satin anodized.

    Show your way -with the innovative turn signal series from HIGHSIDER you not only show where you want to go, but also who you are. This is trend-setting design at its best.

    Dimensions:
    A Diameter: 37 mm
    B Width: 47 mm
    D Depth: 41 mm
    Thread: M8
    Thread length: 20 mm
    Weight: 64 g

    Connections:
    Yellow = Indicator (+)
    Black = Ground (-)

    Supply: 1 pair
    $131.95
    $131.95
    Sold out
  • HIGHSIDER LED turn signal CLASSIC-X1, E-approved
    - Form and function wonderfully merged together. -

    A new attractive turn signal shape to design your vehicle individually. With their extraordinary design, the turn signals fit visually to many motorcycles such as Café Racer, Chopper or Naked Bikes. The CLASSIC-X1 blend in harmoniously with the overall look of your motorcycle. These shapely LED turn signals really have it in itself. High-quality aluminium housing in small classic form and especially bright thanks to SMD technology. Two powerful SMD's provide the unmistakable directional indication. Look forward to these classically shaped direction indicators with tinted reflector, in silver and in black satin anodized.

    Show your way -with the innovative turn signal series from HIGHSIDER you not only show where you want to go, but also who you are. This is trend-setting design at its best.

    Dimensions:
    A Diameter: 37 mm
    B Width: 47 mm
    D Depth: 41 mm
    Thread: M8
    Thread length: 20 mm
    Weight: 64 g

    Connections:
    Yellow = Indicator (+)
    Black = Ground (-)

    Supply: 1 pair
    $131.95
    $131.95
    Sold out
  • HIGHSIDER MONTANA-SLIM handlebar end mirror, short, E-approved

    Now take a look at the HIGHSIDER MONTANA-SLIM handlebar end mirror. Incredible how slim the mirror body is. Without ball mounting only approx. 5 mm thin. The mirror body, mirror arm and the clamping are made of aluminium. The silk matt surface underlines the valuable look. The result is a motorcycle rear view mirror that looks sensational and is perfectly finished as usual.

    Fits 1 inch (25.4 mm) and 7/8 inch (22.2 mm) handlebars. Can be mounted either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror receptacle. The mirror can be mounted on the right and left as well as standing up or hanging down. The precise ball joint enables the comfortable and very stable adjustment of the mirror. A joint on the clamp gives the short version additional adjustment options for better visibility. The mirror head can be directed inwards or outwards with an Allen key.

    Accessory Tip:
    The caps from HIGHSIDER are the perfect addition when handlebar end mirrors are to be mounted. The mirror mounts on the handlebar fittings, which are then no longer needed, can be covered with this in an attractive way.

    Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. This is prudence at its best.

    Dimensions:
    A/B Diameter head: 100 mm
    C Total width: 90 mm
    D Total height: 145 mm
    Stem length: 100 mm
    Weight: 153 g

    Scope of delivery: 1 piece
    1 X Adapter 1 inch
    1 X Adapter 7/8 inch
    $83.95
    $83.95
    Sold out
  • HIGHSIDER PROTON TWO 2in1 LED turn signal/position light, E-approved for front
    - Small, smaller, HIGHSIDER PROTON -

    With a HIGHSIDER PROTON turn signal, the component lighting on the motorcycle can virtually disappear visually. This indicator is only noticeable when it really has to be, for turning or overtaking intentions. The trend towards ever smaller lighting elements makes it possible to give the bike a cool and clean look. Put an end to the oversized torchlight systems from the times of our ancestors. The next level down has been reached and opens up completely new design options on the motorcycle.

    Setting the tone - with the innovative turn signal series from HIGHSIDER you not only show where you want to go, but also who you are. This is trend-setting design at its best.

    Dimensions:
    A Diameter: 11 mm
    B Width: 12 mm
    D Depth: 16 mm
    Thread: M8, Length, 18 mm
    Weight: 20 g

    Connections:
    Yellow = Turn signal (+)
    White = Position light (+)
    Black = Ground (-)

    Scope of supply: 1 pair.
    $143.95
    $143.95
    Sold out
  • HIGHSIDER STEALTH-X5 handlebar end mirror, E-approved
    Suitable for 7/8 and 1 inch handlebars

    The characteristic stealth design known from the military stealth technology distinguishes the shapely and high-quality manufactured mirror. Combined with the matt black colour, the mirror head made of high-quality plastic with its angular elements has a striking appearance. Further visual accents are found in the short aluminium mirror arm, which has three sporty air vents and a joint on the clamp provides additional adjustment for better visibility. Thanks to the use of lightweight materials, the HIGHSIDER STEALTH series belongs to the weight class of flyweights. An adjustable joint provides additional adjustment possibilities for the HIGHSIDER STEALTH-X5. The mirror can be used on the left and right. Can be mounted either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror receptacle. (see accessories)

    Dimensions:
    A Width head: 119 mm
    B Height head: 90 mm
    C Total width: 125 mm
    D Total height: 150 mm
    Stem length: 75 mm
    Weight: 130 g

    Scope of supply: 1 piece incl. Reducing rings for 1 inch and 7/8 inch

    Tip:
    To close the original handlebar mirror mount, use the HIGHSIDER M10 caps.
    $59.95
    $59.95
    Sold out
  • HIGHSIDER TETRA handlebar end mirror, long, bead-blasted black satin finish, E-approved
    - My rear-view mirror, it has three corners ... -

    In the shape of a triangle, the HIGHSIDER TETRA handlebar end mirror scores with its cheeky design and creates variety. With this unusual handlebar end mirror you can design your bike in detail according to your ideas. It underlines your style, looks modern and individual at the same time.

    The rearview mirror housing and stem are made of aluminum, the fine bead blasted surface satin finish. A corrosion-resistant stainless steel ball clamp allows precise adjustment of the mirror. Additional adjustment possibilities due to a joint on the clamp. The mirror head can be turned inwards or outwards for a better view using an Allen key. Suitable for 1 and 7/8 inch steering tube diameters, i.e. for most aluminium and steel handlebars. The handlebar end mirror can be mounted on the right or left as well as standing up or hanging down. Can be mounted either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror receptacle.

    Our accessories TIP:
    Excellent in combination with the matching HIGHSIDER TETRA handlebar weights with handlebar end mirror mount.

    Dimensions:
    A Width head: 108 mm
    B Height head: 122.5 mm
    C Total width: 28.5 mm
    D Total height: 18.5 mm
    Stem length: 76 mm
    Weight: 226 g

    Scope of delivery: 1 piece incl. 7/8 and 1 inch adapters.
    $71.95
    $71.95
    Sold out
  • HIGHSIDER TOREZZO mirror with LED turn signal
    Mirror and turn signal are E-approved.

    Functionality combined with great looks - aluminum handlebar mirror with LED turn signal embedded in the back of the black anodized mirror head. Including extra adapter M10 x 1,25 mm with left hand thread for Yamaha.

    Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design and aerodynamic function. This is prudence at its best.

    Dimensions:
    Width, head: 150 mm
    Height, head: 80 mm
    Depth: 35 mm
    Stem length to bend: 110 mm
    Stem length to thread: 140 mm

    Connections:
    Black wire = ground (-)
    Yellow wire = turn signal (+)

    Scope of delivery: 1 pair.
    $119.95
    $119.95
    Sold out
  • HIGHSIDER VICTORY EVO handlebar end mirror

    Elegant handlebar end mirror with a black anodized head made of aluminum and a curved stem - without kink like the model HIGHSIDER VICTORY. Suitable for handlebars with an inner diameter of 12 to 22 mm, i.e. for most 7/8 inch and 1 inch aluminium or steel handlebars. Can be used for left and right side, E-approved.

    Consideration with style - whether classic or modern. The HIGHSIDER mirror series are characterized by striking design and aerodynamic function. That's how you keep track.

    Dimensions:
    Width, head: 117 mm
    Height, head: 83 mm
    Stem length: approx. 130 mm

    Scope of delivery: 1 piece, including attachment set and universal clamping system.

    Notes:
    For conversion, loosen the five M4 screws and reattach the intermediate adapter on the other side.
    To close any holes for mounting the original handlebar mirrors, please use the HIGHSIDER sealing caps.
    $79.95
    $79.95
    Sold out
  • HIGHSIDER WAVE mirror, E-approved
    Modern but also classic design with versatile adjustment options.

    The HIGHSIDER WAVE mirrors visually complement any motorcycle model in the colors silver, black, red, gold or chrome. Small colored accents between the mirror head and arm add color to your machine. The asymmetrical shape and the CNC milled lines of the case create both a modern and a classic look. The mirror head is supported by an aluminium arm, which is connected classically by M10x1.25 adapter is screwed into the handlebar fitting.

    Consideration with style - whether classic or modern. The HIGHSIDER mirror series are characterized by striking design and aerodynamic function. That's how you keep track.

    Dimensions:
    A Width head: 124 mm
    B Height head: 86 mm
    C Width: 225 mm
    D Height: 175 mm
    Stem length: 55 mm to the bend, then 130 mm to the joint, and another 40 mm to the threaded bolt, (without adapter 29mm)
    Sunk hole M8 x 1.25 mm
    Weight: 230 g

    Scope of delivery: 1 pair.
    $167.95
    $167.95
    Sold out

  • Kellermann LED Indicator Bullet Atto

    LED indicators Bullet Atto, black, clear glass, E-marked, for front and rear, 1 piece
    - Sensationally small, spectacularly bright! -
    Never was aKellerman turn signal smaller. The light area of the Atto fits four times on a 1 Cent coin! This consistent reduction opens up completely new design options on the motorcycle. Through the BulletAtto the component turn signal on the motorcycle can optically virtually disappear. This turn signal is only noticeable when it really has to be. The Bullet Atto offers maximum visibility with minimum sizeBrightness. The complete electronics of the Bullet Atto are housed inside the case, so this indicator can be operated directly on 12 Volt mains.

    Bullet Atto inOverview:
    - EXtranz - Extreme Optical Transparency Technology
    - Kellermann HighPower LED Technology
    - Longlife Protection Guard, IC controlled, 330kHz clocked
    - High quality metal housing
    -Suitable for 12 Volt DC on-board power supplies
    - With M5x0.5x6.5 mounting thread
    - European-wide registered design

    Power consumption in Watt: 1.5 Watt


    Dimensions:
    Diameter glass 7mm

    Scope of delivery: 1 piece
    $71.95
    $71.95
    Sold out
  • Gonia E-examined

    High-end aluminium rear-view mirror made from solid material. The large adjustment range results from the corrosion-resistant stainless steel ball clamp.


    Screw fitting with thread M10 - 1.25


    Execution:left or right


    Scope of supply:
    1 piece.
    $107.95
    $107.95
    Sold out