Electronic box version D The new D-box with extended functions is expected to be available from December 2021.
This electronics box controls the most important functions on the motorcycle. The following options are possible: - Integrated flasher relay, via pushbuttons or switches - Output for indicator control available - 2 inputs for side stand - and neutral switch are implemented - Adjustable turn signal reset and limiting light function of the turn signals (position light) - Control of main beam and low beam via pushbutton or switch - Control of horn via pushbutton - Control of brake light - Control LED's at the outputs for easier monitoring of the functions - Cable reduction in the handlebars via an optionally available handlebar adapter in button mode possible.
By the way, the new D-Box can also be controlled with only 2 buttons. Therefore, no button combinations need to be memorized by the user: - A short press on one of the two buttons switches the respective turn signal on. A further short press on one of the two buttons switches it off again. - A slightly longer press and hold (over about 0.3 seconds) left switches the horn. - A slightly longer press and hold (for about 0.3 seconds) right switches the starter. - Two short button presses on the left side switch between high and low beam. - Two short button presses on the right side turn the ignition on - or off. - A short press on both buttons at the same time switches on the hazard warning lights.
The individual outputs are of course short-circuit proof and self-resetting after a short circuit.
By the way, the D-Box can also be used for Harley Davidson motorcycles with a TSM/TSSM module to control the TSM/TSSM module. A combination with the existing alarm system is thus possible without further ado.
Dimensions: 50 mm length x 12.5 mm width x 42 mm height Current consumption: maximum 7mA at 12V Housing: black impact-resistant ABS plastic, waterproof encapsulated Input voltage: 6 - 18 volts Connections: Control section 0.14mm², power section 0.75 mm², 1.5 mm² for supply cable, 20 cm each Maximum output current: 5 amps per output, current limit at 10 amps Maximum ambient temperature: 80 degrees Celsius Allowable current from 12V connection: 20 amps
Scope of delivery: 1 piece
NOTICE: You can find a small video on how to set up the box here: https://youtu.be/P8NdlLaev_Q If you have any questions about the right box, you can use the following interactive video: https://www.youtube.com/watch?v=nietDWvNRr
NOTE: Replaces item 361-925 electronics box version G and 361-984 electronics box version T.
Adding product to your cart
FREE SHIPING ON ORDERS OVER €50
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.