48 products
  • Gonia E-examined

    High-end aluminium rear-view mirror made from solid material. The large adjustment range results from the corrosion-resistant stainless steel ball clamp.


    Screw fitting with thread M10 - 1.25


    Execution:left or right


    Scope of supply:
    1 piece.
    $107.95
    $107.95
    Sold out
  • LSL NOVA-RACE mirror, E-approved
    - Sporty lines in a pearl-blasted black satin robe -

    In the form of the LSL NOVA-RACE rear view mirror, the LSL accessories forge skillfully juggles the balance of form and function. Because the shape of the mirror should also guarantee perfect function, great importance was attached to the choice of materials and dimensions during the development of the rear-view mirror. The flat mirrors look very pure and visually fit many bikes. The angular rear-view mirror housing is made of aluminium and the finely bead-blasted surface is silk matt, framed by a polished outer frame. A corrosion-resistant stainless steel ball clamp allows precise adjustment of the mirror. The mirror head is supported by an aluminium arm, which is connected classically by M10x1.25 adapter is screwed into the handlebar fitting. For Yamaha models with left-hand thread, a corresponding adapter is included.

    Dimensions:
    A: Width head: 132 mm
    B: Height head: 93 mm
    C: Total width: 255 mm
    D: Total height: 170 mm
    Stem length: 100 mm to the bend, then 100 mm to the joint
    Weight: 245 g

    Scope of supply: 1 pair incl.,
    2x M10x 1.25mm right hand thread adapter
    1x M10x 1.25mm left-hand thread adapter
    $179.95
    $179.95
    Sold out
  • LSL RETRO mirror, surface satin, E-tested
    - The good old days -

    Today is also yesterday again. For even today, the recourse to organic forms that have already been there is still popular. In the form of the LSL RETRO rear view mirror, the LSL accessories forge skillfully juggles the balance of form and function. Because the shape of the mirror should also guarantee perfect function, great importance was attached to the choice of materials and dimensions during the development of the rear-view mirror. The round rear-view mirror housing is made of aluminium and the finely bead-blasted surface is satin matt. A corrosion-resistant stainless steel ball clamp allows precise adjustment of the mirror. The mirror head is supported by an aluminium arm, which is connected classically by M10x1.25 adapter is screwed into the handlebar fitting. For Yamaha models with left-hand thread, a corresponding adapter is included.

    The mirror series LSL RETRO is characterized by its characteristic design and aerodynamic function. This way you can keep track of everything.

    Dimensions:
    A width head: 100 mm
    B height head: 100 mm
    C total width: 175 mm
    D total height: approx 215 mm
    Stem length: 150 mm to the joint, then another 30 mm to the threaded bolt

    Scope of supply: 1 piece incl.
    1x M10 x 1.25 mm right-hand thread adapter
    1x M10 x 1.25 mm left-hand thread adapter
    $71.95
    $71.95
    Sold out

  • motogadget mo.blaze tens2 LED taillight/brake light

    motogadget LED taillight/brake light mo.blaze tens2, its tiny dimensions and reduced design make it almost disappear on the vehicle, E-approved, piece.
    The mo.blaze tens2 from motogadget is the smallest taillight/brake light combination in the world.

    His tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to the IntensiLED® Technology and definitely not to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The tail light/brake light combination has ECE approval as a rear tail light and brake light. The aluminium housing is CNC milled and available in black anodized or high gloss polished finish. The tail light/brake light combination can be operated with 12 V like any other LED light.

    Advantages:
    - Extremely small aluminum housing
    - ECE approval, no registration or similar necessary
    - Increased visibility and safety through additional lateral beam angle
    - Highest luminosity through the latest high-power LED technology (IntensiLED®)
    - Electronic voltage conditioning through 330kHz clocked, IC controlled constant current source and safe protection electronics
    - The mounting thread is standard M8. Therefore no mounting adapters or special heatsink nut required

    Specifications and Features:
    Total length with thread: 29 mm
    Length without mounting thread: 11 mm
    Largest diameter: 11 mm
    Cable length: approx. 110 cm
    Weight with cable: approx. 20 g
    Mounting: M8 threaded bolt
    Power consumption: approx. 1/1 watt

    Scope of delivery: 1 piece, incl.
    - Nut M8
    - 3 push-lock cable connectors
    - Installation instructions.
    $70.80
    $70.80
    Sold out
  • The new mo.unit blue has been further developed and significantly improved compared to the proven previous version. It now has 12 inputs and 10 outputs, interchangeable quality cable clamps and most importantly Bluetooth® LE. This allows the mo.unit blue to connect directly to our mo.ride app on the smartphone. This functionality is unique in the accessories sector for motorcycles.

    The entire setup and alarm system can be controlled via the mo.ride app. Fault diagnosis is also possible during operation and without removing the mo.unit. A secure, encrypted keyless-go function can also be used.

    When activated, approaching the vehicle with your own smartphone is enough to put the vehicle into launch readiness. This means that the on-board voltage can be switched on by pressing the start button. Pressing it again will then start the engine. Once switched on, the on-board power supply remains safely activated while driving, even without a telephone.

    The mo.unit blue is the digital control unit for a motorcycle, the heart of the entire vehicle electrical system. It can be operated with push-button fittings or with conventional, switching handlebar fittings. It switches all necessary components on the vehicle and at the same time it takes over the tasks of the electrical fuses.

    Relays and individual components in the wiring harness are greatly reduced and a new, minimized wiring of the vehicle can be done in a very short time.

    When using the mo.button, the number of all switch armature connections is reduced to a single cable.


    Features WITHOUT smartphone and mo.ride app:
    - Complete digital push button control, 4-button or 5-button operation possible
    - Complete replacement for the fuse box. 10 independent circuits are digitally monitored and switched off in case of malfunctions. After elimination of the fault, the fuse function is automatically reset
    - Integrated, position-independent alarm system
    - Integrated, digital, load-independent flasher relay, automatic switch-off optional and adjustable, mo.wave mode selectable
    - Integrated hazard warning flashers
    - Turn signals optionally adjustable as position light
    - Parking lights and headlight flasher integrated
    - Control of low and high beam (up to 200 W switching power) with only one button
    - Integrated, digital brake light modulator, flashing mode programmable
    - Acceleration-controlled hazard brake light (automatic warning signal)
    - Integrated starter relay for starters with magnetic switch (up to 30 A switching capacity)
    - Intelligent and configurable control/switching off of the consumers, to be able to use the maximum starting energy of the battery during the starting process
    - Integrated, digital horn relay
    - Two configurable additional outputs AUX1 and AUX2
    - Diagnostic function for assignment of input, output, switching status of the circuit, short circuit diagnosis, etc.
    - Calibration and current measurement enables defect detection of all illuminants

    Features WITH smartphone and mo.ride app:
    - Encrypted connection via Bluetooth® LE (Low Energy), thus tamper-proof
    - Extremely low power consumption of smartphone and mo.unit blue (with active Bluetooth 0.9mA and in Powersave mode after 6 weeks of inactivity: 0.3mA)
    - Keyless-Go (ready to start the vehicle by approaching it with your own smartphone)
    - Highly sensitive accelerometer enables the display of your driving activity in mo.ride by an activity factor, number of turns, top speed, etc.
    - Transmission of alarmo.events (with date, time, vehicle on the ground, etc.) to the app
    - Setting of mode and sensitivity of the alarm system
    - Monitoring of the current battery voltage in the app
    - Diagnosis of all inputs and outputs, measurement of currents, voltage, device temperature
    - Defect detection of all lamps by calibration. Defective turn signals result in doubling of the flashing frequency, status message in the app and audio notification through Rideassist.
    - Rideassist: optional turn signal sound and error messages in real time as audio output via helmet headset.
    - Manual switching of outputs via smartphone (except starter)
    - Firmware updates without removal at any location via smartphone and app
    - Configuration of setup menu without removal at any location via smartphone and app
    - Vehicle management with automatic notifications of maintenance tasks, condition of tyres, chain, brake pads, oils, operating fluids, spark plugs, etc. by matching the vehicle mileage via speedometer signal
    - Logbook records trips and stores all generated vehicle messages, alarm events and maintenance tasks
    - Display of parking position and ping! to help with vehicle search
    - LIN bus connection available for later connection of suitable motogadget products

    Technical requirements:
    iPhone from iOS 10 / Android from 8.0 (compatibility may be limited due to manufacturer).
    Further info on the app also at mo.ride.de or in Google Play and iTunes.


    Scope of delivery:
    - mo.unit blue
    - 1 x M5 stainless steel screw
    - 2 x M5 stainless steel screw with nut
    - 1 x speedometer sensor with 2 magnets
    - Detailed installation and operating instructions

    Matching plus cable (NOT INCLUDED IN THE DELIVERY!): 362-001 or 362-002

    Specifications and features:
    L/W/H: 101 x 61 x 28 mm
    Weight: approx. 180 g
    Mounting: 2 x M5 stainless steel screws (mounting and ground connection), 1 x M5 screw contact for battery plus
    Operating voltage: 6 V - 20 V
    Operating temperature: -20°.... +80°C

    Inputs:
    1 x input (+12V switched) for ignition lock or mo.lock
    11 x control input (minus/ground switched) for:
    - Turn signal left
    - Turn signal right
    - Low/high beam
    - Starter
    - Horn
    - Brake light
    - Kill switch
    - Stand switch
    - LIN bus
    - AUX1
    - AUX2

    Outputs:
    10 x output (+12V) for:
    - Turn signal left
    - Turn signal right
    - Low beam
    - High beam
    - Starter
    - Horn
    - Brake light
    - Ignition
    - AUX1
    - AUX2
    $440.00
    $440.00
    Sold out

  • Motogadget mo.blaze tens3 LED taillight, brake light, turn signal

    motogadget LED taillight, brake light, turn signal mo.blaze tens3, its tiny dimensions and reduced design make it almost disappear on the vehicle, E-approved, piece.
    The mo.blaze tens3 from motogadget is the smallest 3in1 turn signal in the world. It is at the same time indicator, rear light and brake light in one light element.

    His tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to the IntensiLED® Technology and definitely not to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The mounted indicator has ECE approval as a rear direction indicator/tail light/brake light. The aluminium housing is CNC milled and available in black anodized or high gloss polished finish. The flasher can be operated like any other LED flasher with load resistors or our load-independent flasher relays (mo.flash, mo.wave, mo.stop, mo.relay+). Matching the mo.blaze tens3 we offer the mo.blaze tens4 as turn signal with position light for the front.

    Advantages:
    - Extremely small aluminum housing
    - ECE approval, no registration or similar necessary
    - Increased visibility and safety through additional lateral beam angle
    - Highest luminosity through the latest high-power LED technology (IntensiLED®)
    - Electronic voltage conditioning through 330kHz clocked, IC controlled constant current source and safe protection electronics
    - The mounting thread is standard M8. Therefore no mounting adapters or special heatsink nut required

    Specifications and Features:
    Total length with thread: 29 mm
    Length without mounting thread: 11 mm
    Largest diameter: 11 mm
    Cable length: approx. 110 cm
    Weight with cable: approx. 20 g
    Mounting: M8 threaded bolt
    Power consumption: approx. 1/2/3 watt

    Scope of delivery: 1 piece
    - Nut M8
    - 4 push-lock cable connectors
    - Installation instructions.
    $118.99
    $118.99
    Sold out

  •  

    MOTOISM Fork clamp (2-piece) + integrated turn signal with position light TYPE-THREE

    Carbon fiber reinforced plastic, 2-piece even easier to mount, universal fit, turn signals fit to steering head angle, with position light, ultra bright LED technology, minimal weight, high quality finish in matte black, very durable, pair
    MOTOISM - Two-piece fork clamp with integrated turn signal and position people Type THREE

    Made in Germany - made of carbon fiber reinforced high-performance plastic

    It is always a challenge to mount turn signals coherently and with little effort. MOTOISM now has the optimal solution for this. The turn signal fork clamps only have to be put over the fork and fixed with four screws. The turn signal cable runs hidden inside the clamp for a tidy and clean look.
    To ensure that the turn signal fork clamp also fits your motorcycle, it is available in many different diameters.

    Highlight of this version: flashing lights and position lights in one!

    Product Features:

    - turn signals and position lights in one
    - carbon fiber reinforced plastic
    - fits almost every model
    - turn signals aligned to fit the steering head angle
    - ultra bright due to LED technology. - 5 SMDs
    - minimal weight
    - high quality paint finish in matt black
    - very durable
    - supplied in pairs
    - available in many different diameters

    The fork clamp

    set has an E-mark.Set has an E-mark and is approved as a front turn signal.

    The super small, powerful LED turn signals connect easily to your existing wiring harness with Japanese plugs. If you are installing LED turn signals on your motorcycle for the first time, please also order a resistor for the LED turn signals.
    $215.99
    $215.99
    Sold out

  • LED turn signal TYPE-ONE SHORT, made of carbon fibre reinforced high performance plastic, made in Germany, E-approved, pair

    MOTOISM - Turn signal TYPE-ONE SHORT

    Made in Germany - made of carbon fiber reinforced high performance plastic

    Product features:
    - carbon fiber reinforced high performance plastic
    - fits almost every model
    - supplied in pairs
    - ultra bright due to LED technology - 3 SMDs
    - with E-mark - approved for road traffic
    - minimal weight
    - high quality paint finish in matte black
    - very durable

    Less is more! Thanks to its slim and simple design, the TYPE-ONE turn signal fits any motorcycle and replaces the bulky, large OEM turn signals. The line of your bike remains undisturbed.

    The turn signal set has an E-mark and is approved as a rear turn signal.

    The super small, powerful LED turn signals connect easily to your existing wiring harness with Japanese plugs. In case you mount LED turn signals on your motorcycle for the first time, please also order a resistor for the LED turn signals.

    Dimensions:
    Height: 15 mm
    Width: 25 mm
    Depth: 18 mm

    Scope of supply:
    - Two indicators including connection cable (30 cm)
    - M8 fine-thread nut.
    $95.99
    $95.99
    Sold out
  • SHIN YO 7 inch LTD main headlight, E-approved

    - Approved as main headlight
    - Available in black matt or shiny with chrome ring metal housing
    - H4 insert with Parking light
    - Embossed glass
    - Mounting: Side, M8 x 1.25

    - Dimensions:
    - Distance between mounting holes: 200 mm
    - Depth: 120 mm
    - Distance between mounting holes and back of housing:70 mm

    Assignment:
    H4 connector
    Green = Ground
    White = Low beam
    Blue = High beam

    Stand light
    Black = Ground
    Brown = Stand light +

    Supply includes: 1 piece incl.
    - 1x triple connector
    -1x bracket
    - 1x parking light bulb

    Note:
    Supplied without H4 bulb
    $71.95
    $71.95
    Sold out
  • SHIN YO 7 inch LTD main headlight, E-approved

    - Approved as main headlight
    - Available in black matt or shiny with chrome ring metal housing
    - H4 insert withParking light
    - Embossed glass
    - Mounting: Side, M8 x 1.25

    - Dimensions:
    - Distance between mounting holes: 200 mm
    - Depth: 120 mm
    - Distance between mounting holes and back of housing:70 mm

    Assignment:
    H4 connector
    Green = Ground
    White = Low beam
    Blue = High beam

    Stand light
    Black = Ground
    Brown = Stand light +

    Supply includes: 1 piece incl.
    - 1x triple connector
    -1x bracket
    - 1x parking light bulb

    Note:
    Supplied without H4 bulb
    $71.95
    $71.95
    Sold out
  • SHIN YO LED flasher DROP
    Modern lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Very bright mini flasher with black plastic housing and transparent glass, E-examined.

    Dimensions:
    A: 33 mm
    C: 20 mm
    D: 21,5 mm
    Threaded bolt: M6

    Scope of supply: 1 pair
    $33.55
    $33.55
    Sold out
  • SHIN YO LED flasher PICCO
    Modern lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Very bright mini flasher with plastic housing and transparent glass, E-approved.

    Dimensions:
    A: 27 mm
    C: 18 mm
    D: 17 mm
    Threaded bolt: M6

    Scope of supply: 1 pair
    $29.90
    $29.90
    Sold out
  • SHIN YO LED flasher PICCO
    Modern lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Very bright mini flasher with plastic housing and transparent glass, E-approved.

    Dimensions:
    A: 27 mm
    C: 18 mm
    D: 17 mm
    Threaded bolt: M6

    Scope of supply: 1 pair
    $29.90
    $29.90
    Sold out
  • SHIN YO LED flasher TINY
    Modern lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Mini indicators with plastic housing and transparent glass, E-tested.

    Dimensions:
    A: 23 mm
    B: 25 mm
    C: 13 mm
    D: 15 mm
    Threaded bolt: M8

    Scope of supply: 1 pair
    $39.54
    $39.54
    Sold out
  • SHIN YO Turn signal LITTLE DUKE
    Mini turn signal with plastic housing, yellow glass and short 20 mm stem.

    Dimensions:
    A: 55 mm
    B: 75 mm
    C: 35 mm
    D: 52 mm
    Thread bolt: M10
    Bulb: 12V 10W BA15S

    Scope of delivery: 1 pair

    Spare parts:
    Spare bulb: Art. No. 209-165
    Spare glass: Art. No. 205-201
    $17.95
    $17.95
    Sold out
  • SHIN YO MODUL MH-70 3in1 LED rear, brake light indicator, E-approved for rear.

    Round LED installation indicator for almost invisible installation on the motorcycle, quad or scooter. The SHIN YO MODUL MH-70 can be fitted in many positions on the vehicle and is particularly popular for conversions where turn signals should not be visible or simply have no place. Stylish look with tinted reflector and thanks to luminous LEDs unmissable.

    Dimensions:
    Diameter: 30 mm
    Depth: 20 mm
    Cable length 400 mm

    Connections:
    Yellow = turn signal (+)
    Red = brake (+) white = taillight (+)
    Black = ground (-)

    Scope of delivery: 1 pair
    $43.95
    $43.95
    Sold out
  • SHIN YO STRAIGHT handlebar end mirror, short

    The STRAIGHT is a trendy and, thanks to its plastic head, lightweight mirror.
    It is suitable for handlebars with a diameter of 7/8 inch and 1 inch.
    The mirror can be used on the left and right and is available in a short or long version.
    You can mount the mirror either with the supplied reducing sleeves directly on the handlebar or on our special handlebar end weights HIGHSIDER DOT, HIGHSIDER CURVE, HIGHSIDER CONERO, etc. which are available optinal.

    Details:
    Approval: E-approved
    Color: black
    Width head A: 120 mm
    Height head B: 85 mm
    Stalk length center - center: 75 mm

    Scope of delivery: 1 pc. incl. reducing rings for 1 inch and 7/8 inch
    $35.95
    $35.95
    Sold out
  • SHIN YO Turn signal LITTLE DUKE
    Mini turn signal in black plastic housing with yellow glass and long 40 mm stem, E-approved.

    Dimensions:
    A: 55 mm
    B: 96,5 mm
    C: 35 mm
    D: 52 mm
    Thread bolt: M10
    Bulb: 12V 10W BA15S

    Scope of delivery: 1 pair

    Spare parts:
    Spare bulb: Art. No. 209-165
    Spare glass: Art. No. 205-201
    $17.95
    $17.95
    Sold out
  • SHIN YO Universal Mirror AGILA
    Classic handlebar mirror with an oval head made of chromed aluminium or black.

    Dimensions
    Head width: 125 mm
    Head height: 62 mm

    Scope of supply: 1 piece
    $15.95
    $15.95
    Sold out
  • SHIN YO Universal Mirror AGILA
    Classic handlebar mirror with an oval head made of chromed aluminium or black.

    Dimensions
    Head width: 125 mm
    Head height: 62 mm

    Scope of supply: 1 piece
    $15.95
    $15.95
    Sold out
  • Mini mirror, chrome plated, mirror surface 118 x 65 mm, M10 right hand thread, for left and right side, piece
    $17.95
    $17.95
    Sold out

  • DAYTONA Active sensor

    DAYTONA, active sensor for VELONA, ASURA, NANO2 speedometers and NANO2 gear indicator.
    $47.95
    $47.95
    Sold out
  • DAYTONA tachometer shaft adapter, twin signal type

    converter for mounting on the original tachometer drives of various motorcycle manufacturers.
    The rotary signal of the speedometer drive/shaft is converted into a digital signal by mounting the converter. A practical solution to save you the hassle of mounting magnets and sensors.

    - Suitable for VELONA and ASURA speedometers
    >- Speed pulse converters

    Scope of supply: 1 piece
    $59.95
    $59.95
    Sold out
  • VELONA electronic tachometer with speed display from DAYTONA

    The tachometer has an analogue speed display and a digital speedometer.Signal of the motorcycle. The signals of almost all common motorcycles can be converted.
    If the motorcycle does not provide a digital signal, an activeUniversal speed sensor or a tachometer shaft adapter as well as an induction cable set for determining the speed can be ordered in addition.

    Overview:
    - Speed and rotational speed inone instrument
    - On motorcycles with electronic sensor, the signal can be taken from the original pulse generator
    - LCD display many functions
    - Display with stepper motor forquick display of the current speed or rpm
    - holder included
    - easy adjustment by means of two buttons on the back
    (Optionally available is a display on the handlebarsmountable 2-button remote control)
    - Only suitable for 12V DC
    - Ø 80mm
    - Matt black stainless steel housing
    - White backlighting
    - For motorcycles with electronicsensor, the signal can be taken from the original impulse transmitter

    Functions:
    - Speed range: 0-9,000 or 0-15,000 rpm (display analogue)
    - Speedometer: 0-260 km/h(0-260 MPH) (displaydigital)
    - odometer: 0,0-99.999,9 km(mile)
    - trip meter: 0,0-99.999,9 km(mile)
    - voltmeter: 0.0-18.0 V
    - V-Max. Storage
    - rpm-Max. Storage
    - LED forLEDs for flasher, high beam, idle and a warning LED for various functions
    - Adjustable pulse rate 1P-1r/1P-2r/2P-1r/30P-1r
    - Adjustable pulse rateSuitable for 12 V
    - Incl. holder

    Scope of delivery:
    - Tachometer incl. holder

    Optional order:
    - Active speed sensor universal, article 361-555
    -Speedometer cable adapter, article 361-569
    - For speed reduction at the ignition coil or ignition cable, induction cable set article 361-550
    - 2-button remote control, article 240-065 (sw), 240-066(cr)
    $246.00
    $246.00
    Sold out